The Official Android 5.1.1 Lollipop

Sony has released an update to Android 5.1.1 Lollipop for their Xperia Z series.  The original devices in these series ran Android Jellybean and they also previously received updates to KitKat.

For the Xperia ZL, the variants that are getting this update are C6503 and C6506.  This update has build number 10.7.A.0.222 and is being released via OTA and Sony PC Companion.

As is usually the case, the updates are reaching different regions at different times.  If the update is not in your region yet and you just cannot wait, you can flash it manually.  In this post, we are going to show you how to update the Xperia ZL to Android 5.1.1 Lollipop with build number 10.7.A.0.222 firmware with Sony Flashtool.

Kwadebe ekwentị gị

1. This guide should only be used with a Sony Xperia ZL C6503 and C6506. If you use it with another device you could brick the device.  Check your model number by going to Settings>About Device.
2. Charge battery to at least over 60 percent to prevent running out of power before flashing is done.
3. Weghachite kọntaktị dị mkpa, ozi SMS ma kpọọ ndekọ. Weghachite faịlụ ọ bụla dị mkpa mgbasa ozi site na ịpị ha na PC ma ọ bụ Laptọọpụ.
4. Enable device’s USB debugging mode by going to Settings>Developer Options>USB debugging. If you do not find developer options you will need to activate it.  To activate go to Settings>About Device.  Look for build number and tap 7 times.  Go back to settings and you should now find developer options.
5. Have Sony Flashtool installed and setup on your device. After installing Sony Flashtool, open Flashtool folder.  Open Flashtool>Drivers>Flashtool-drivers.exe and from there, install Flashtool, Fastboot and Xperia ZL drivers.
6. Have an OEM data cable to connect device to a PC.

Mara: Usoro ndị achọrọ iji gbanye mgbake omenala, roms na ịgbanye ekwentị gị nwere ike ibute bricking ngwaọrụ gị. Iwepụta ngwaọrụ gị ga-emekwa ka akwụkwọ ikike ahụ ghara ịdị na ya, ọ gakwaghị eru eru inweta ọrụ ngwaọrụ n'efu nke ndị nrụpụta ma ọ bụ ndị na-eweta ikike. Buru ibu ma debe ha n'uche tupu ị kpebie ịga n'ihu na ọrụ nke gị. Ọ bụrụ na nsogbu etinyere, anyị ma ọ bụ ndị na-emepụta ngwaọrụ agaghị enwe ọrụ ọ bụla.

download:

Ngwaọrụ kachasị ọhụrụ 5.1.1 Lollipop 10.7.A.0.222 FTF faịlụ.

1. Xperia ZL C6503 [Generic / Unbranded] Link 1 –
2.  Xperia ZL C6506 [Generic / Unbranded] Njikọ 1 -

Wụnye:

1. Copy and face downloaded firmware file to Flashtool>Firmwares folder.
2. Mepee Flashtool.exe
3. Look for small lightening button on top left corner of Flashtool. Hit button and select Flashmode.
4. Select FTF file that you placed in the Firmware folder.
5. On right side, choose what to wipe. We recommend you wipe data, cache and apps log.
6. Click OK and firmware will be prepared for flashing
7. When firmware finishes loading, you will get a prompt to attach phone to a PC. Turn phone off and press the volume down key.Keeping the volume down key pressed, plug in the data cable.
8. Don’t let go of volume down key. If you connected your device properly, your phone should automatically be detected in Flashmode and firmware will begin flashing.
9. When you see “Flashing ended or Finished Flashing”, let go of volume down key, unplug the device and it will reboot.

Have you installed Android 5.1.1 Lollipop on your Sony Xperia ZL?

Kọọ ahụmahụ gị na igbe dị n'okpuru.

JR